Initial commit
This commit is contained in:
379
TMC2209/lib/tmc/hal/Landungsbruecke/freescale/USB_CDC/CDC1.h
Normal file
379
TMC2209/lib/tmc/hal/Landungsbruecke/freescale/USB_CDC/CDC1.h
Normal file
@@ -0,0 +1,379 @@
|
||||
/* ###################################################################
|
||||
** THIS COMPONENT MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
|
||||
** Filename : CDC1.h
|
||||
** Project : Landungsbruecke_KDS_v2.0.0
|
||||
** Processor : MK20DN512VLL10
|
||||
** Component : FSL_USB_CDC_Device
|
||||
** Version : Component 01.031, Driver 01.00, CPU db: 3.00.000
|
||||
** Compiler : GNU C Compiler
|
||||
** Date/Time : 2015-01-09, 16:27, # CodeGen: 0
|
||||
** Abstract :
|
||||
**
|
||||
** Settings :
|
||||
** Component name : CDC1
|
||||
** CPU : Kinetis K20D72
|
||||
** CDC Settings : Enabled
|
||||
** .inf ClassGuid : 4D36E978-E325-11CE-BFC1-08002BE10318
|
||||
** .inf VID : 2504
|
||||
** .inf PID : 0300
|
||||
** .inf PRVDR : Freescale
|
||||
** .inf MFGNAME : My Company
|
||||
** .inf DESCRIPTION : Freescale CDC Device
|
||||
** .inf SERVICE : Virtual Com Driver
|
||||
** Bus reported device : FSL CDC DEVICE
|
||||
** Bus reported vendor : FREESCALE INC.
|
||||
** Send Buffer : RingBuffer
|
||||
** Receive Buffer : RingBuffer
|
||||
** Use Timeout : Disabled
|
||||
** Contents :
|
||||
** ClearRxBuffer - void CDC1_ClearRxBuffer(void);
|
||||
** ClearTxBuffer - void CDC1_ClearTxBuffer(void);
|
||||
** GetFreeInTxBuf - word CDC1_GetFreeInTxBuf(void);
|
||||
** GetCharsInTxBuf - word CDC1_GetCharsInTxBuf(void);
|
||||
** GetCharsInRxBuf - word CDC1_GetCharsInRxBuf(void);
|
||||
** GetChar - byte CDC1_GetChar(CDC1_TComData *Chr);
|
||||
** RecvChar - byte CDC1_RecvChar(CDC1_TComData *Chr);
|
||||
** SendChar - byte CDC1_SendChar(CDC1_TComData Chr);
|
||||
** SendString - byte CDC1_SendString(CDC1_TComData *Chr);
|
||||
** SendBlock - byte CDC1_SendBlock(byte *data, word dataSize);
|
||||
** PutBufferChecked - byte CDC1_PutBufferChecked(byte *buf, size_t bufSize);
|
||||
** App_Callback - void CDC1_App_Callback(byte controller_ID, byte event_type, void *val);
|
||||
** Notify_Callback - void CDC1_Notify_Callback(byte controller_ID, byte event_type, void *val);
|
||||
** App_Task - byte CDC1_App_Task(byte *txBuf, size_t txBufSize);
|
||||
** Init - byte CDC1_Init(void);
|
||||
**
|
||||
** (c) Copyright Freescale, all rights reserved, 2013
|
||||
** Ported as Processor Expert component: Erich Styger
|
||||
** http: www.mcuoneclipse.com
|
||||
** ###################################################################*/
|
||||
/*!
|
||||
** @file CDC1.h
|
||||
** @version 01.00
|
||||
** @brief
|
||||
**
|
||||
*/
|
||||
/*!
|
||||
** @addtogroup CDC1_module CDC1 module documentation
|
||||
** @{
|
||||
*/
|
||||
|
||||
#ifndef __CDC1_H
|
||||
#define __CDC1_H
|
||||
|
||||
/* MODULE CDC1. */
|
||||
|
||||
/* Include shared modules, which are used for whole project */
|
||||
|
||||
#include "PE_Types.h"
|
||||
#include "PE_Error.h"
|
||||
#include "PE_Const.h"
|
||||
#include "MK20D10.h"
|
||||
#include "MK20D10.h"
|
||||
/* Include inherited beans */
|
||||
#include "Tx1.h"
|
||||
#include "Rx1.h"
|
||||
#include <stddef.h> /* for size_t */
|
||||
|
||||
//#include "Cpu.h"
|
||||
|
||||
|
||||
#ifndef __BWUserType_CDC1_TComData
|
||||
#define __BWUserType_CDC1_TComData
|
||||
typedef byte CDC1_TComData ; /* User type for communication data type. */
|
||||
#endif
|
||||
|
||||
/*
|
||||
DATA_BUFF_SIZE should be greater than or equal to the endpoint buffer size,
|
||||
otherwise there will be data loss. For MC9S08JS16, maximum DATA_BUFF_SIZE
|
||||
supported is 16 Bytes
|
||||
*/
|
||||
#define CDC1_DATA_BUFF_SIZE 64
|
||||
|
||||
#define CDC1_USB_ERR_SEND 1 /* Error while sending */
|
||||
#define CDC1_USB_ERR_BUSOFF 2 /* Bus not ready */
|
||||
#define CDC1_USB_ERR_INIT 3 /* USB initialization error */
|
||||
#define CDC1_USB_ERR_TX_CHAR 4 /* Error sending character */
|
||||
#define CDC1_USB_ERR_TX_STRING 5 /* Error sending string */
|
||||
#define CDC1_USB_ERR_CHECKED_TXFULL 6 /* Error during sending a checked block */
|
||||
#define CDC1_USB_ERR_RECEIVE 7 /* Error while starting an receive transaction */
|
||||
#define CDC1_USB_ERR_RX_PUT 8 /* Error while putting RX byte into buffer */
|
||||
#define CDC1_USB_ERR_TX_BLOCK 9 /* Error sending data block */
|
||||
#define CDC1_USB_TIMEOUT_SEND 10 /* Timeout while sending */
|
||||
|
||||
|
||||
#define CDC1_GetFreeInTxBuf() \
|
||||
Tx1_NofFreeElements()
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_GetFreeInTxBuf (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Returns the number of free character in the send buffer
|
||||
** Parameters : None
|
||||
** Returns :
|
||||
** --- - Number of free character in the receive
|
||||
** buffer.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
byte CDC1_RecvChar(CDC1_TComData *Chr);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_RecvChar (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Receives a character from the USB interface. Function is
|
||||
** blocking if there is no character in the input buffer.
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** * Chr - Pointer to where to store the character
|
||||
** received
|
||||
** Returns :
|
||||
** --- - Error code, ERR_OK for success,
|
||||
** ERR_RXEMPTY if nothing is in RX buffer.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
byte CDC1_SendChar(CDC1_TComData Chr);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_SendChar (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Method to send a character to the USB interface. Method is
|
||||
** non-blocking: If the output buffer is full, it tries to send
|
||||
** it over USB. If this fails or buffer is still full, the
|
||||
** character will be lost. If OnError() event is enabled, the
|
||||
** error event will be called in case of error.
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** Chr - Character to send.
|
||||
** Returns :
|
||||
** --- - Error code. ERR_OK for success and
|
||||
** ERR_FAILED otherwise.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
#define CDC1_GetCharsInTxBuf() \
|
||||
Tx1_NofElements()
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_GetCharsInTxBuf (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Returns the number of character in the send buffer
|
||||
** Parameters : None
|
||||
** Returns :
|
||||
** --- - Number of character in the receive buffer.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
word CDC1_GetCharsInRxBuf(void);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_GetCharsInRxBuf (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Returns the number of character in the receive buffer
|
||||
** Parameters : None
|
||||
** Returns :
|
||||
** --- - Number of character in the receive buffer.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
byte CDC1_Init(void);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_Init (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Initializes the driver
|
||||
** Parameters : None
|
||||
** Returns :
|
||||
** --- - Error code
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
byte CDC1_App_Task(byte *txBuf, size_t txBufSize);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_App_Task (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Application task to be called periodically from the main
|
||||
** task.
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** * txBuf - Pointer to temporary buffer used to
|
||||
** transmit data over USB. Should be equal or
|
||||
** greater than the endpoint buffer size. Data
|
||||
** will be sent in an asynchronous way, so
|
||||
** make sure the buffer is *not* on the stack.
|
||||
** This buffer must be available until the
|
||||
** next transmission.
|
||||
** txBufSize - Size of the buffer in bytes
|
||||
** Returns :
|
||||
** --- - Error code, returns ERR_OK if USB
|
||||
** enumeration has been finished, error code
|
||||
** otherwise.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
byte CDC1_SendString(CDC1_TComData *Chr);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_SendString (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Method to send a string to the USB interface. Method is
|
||||
** non-blocking: if string cannot be sent, it will be lost. If
|
||||
** OnError() event is enabled, the error event will be called
|
||||
** in case of error.
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** * Chr - Pointer to string to send.
|
||||
** Returns :
|
||||
** --- - Error code. ERR_OK for success and
|
||||
** ERR_FAILED otherwise.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
#define CDC1_GetChar(Chr) \
|
||||
Rx1_Get(Chr)
|
||||
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_GetChar (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Receives a character from the USB interface. Function is not
|
||||
** blocking if there is no character in the input buffer.
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** * Chr - Pointer to where to store the character
|
||||
** received
|
||||
** Returns :
|
||||
** --- - Error code, ERR_OK for success,
|
||||
** ERR_RXEMPTY if nothing is in RX buffer.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
byte CDC1_PutBufferChecked(byte *buf, size_t bufSize);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_PutBufferChecked (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Puts a data block into the output buffer, but does not send
|
||||
** it. If there is not enough size available, then ERR_TXFULL
|
||||
** is returned, otherwise ERR_OK. The application then needs to
|
||||
** call USB_App_Callback() to actually send the buffer.
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** * buf - Pointer to buffer to be sent
|
||||
** bufsize - Buffer size in bytes
|
||||
** Returns :
|
||||
** --- - Error code
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
void CDC1_App_Callback(byte controller_ID, byte event_type, void *val);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_App_Callback (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Method to handle class callbacks from USB
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** controller_ID - controller ID
|
||||
** event_type - value of the event
|
||||
** val - gives the configuration value
|
||||
** Returns : Nothing
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
void CDC1_Notify_Callback(byte controller_ID, byte event_type, void *val);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_Notify_Callback (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Method to handle PSTN Sub Class callbacks
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** controller_ID - controller ID
|
||||
** event_type - value of the event
|
||||
** val -
|
||||
** Returns : Nothing
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
#define CDC1_ClearRxBuffer() \
|
||||
Rx1_Clear()
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_ClearRxBuffer (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Clears the receiver buffer content
|
||||
** Parameters : None
|
||||
** Returns : Nothing
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
#define CDC1_ClearTxBuffer() \
|
||||
Tx1_Clear()
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_ClearTxBuffer (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Clears the transmit buffer content
|
||||
** Parameters : None
|
||||
** Returns : Nothing
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
void CDC1_RunUsbEngine(void);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_RunUsbEngine (component FSL_USB_CDC_Device)
|
||||
**
|
||||
** Description :
|
||||
** Runs the USB polling engine
|
||||
** This method is internal. It is used by Processor Expert only.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
byte CDC1_SendBlock(byte *data, word dataSize);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_SendBlock (component FSL_USB_CDC_Device)
|
||||
** Description :
|
||||
** Method to send a data block to the USB interface. Method is
|
||||
** non-blocking: if data cannot be sent, it will be lost. If
|
||||
** OnError() event is enabled, the error event will be called
|
||||
** in case of error.
|
||||
** Parameters :
|
||||
** NAME - DESCRIPTION
|
||||
** * data - Pointer to data to send.
|
||||
** dataSize - Size of data in bytes
|
||||
** Returns :
|
||||
** --- - Error code. ERR_OK for success and
|
||||
** ERR_FAILED otherwise.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
byte CDC1_SendDataBlock(byte *data, word dataSize);
|
||||
/*
|
||||
** ===================================================================
|
||||
** Method : CDC1_SendDataBlock (component FSL_USB_CDC_Device)
|
||||
**
|
||||
** Description :
|
||||
** Sends a USB data block
|
||||
** This method is internal. It is used by Processor Expert only.
|
||||
** ===================================================================
|
||||
*/
|
||||
|
||||
/* END CDC1. */
|
||||
|
||||
#endif
|
||||
/* ifndef __CDC1_H */
|
||||
/*!
|
||||
** @}
|
||||
*/
|
||||
/*
|
||||
** ###################################################################
|
||||
**
|
||||
** This file was created by Processor Expert 10.4 [05.11]
|
||||
** for the Freescale Kinetis series of microcontrollers.
|
||||
**
|
||||
** ###################################################################
|
||||
*/
|
||||
Reference in New Issue
Block a user