Initial commit

T-Display-S3-main/lib/DabbleESP32/examples/01.LedBrightnessControl/01.LedBrightnessControl.ino

@@ -0,0 +1,35 @@
+/*
+   This is Led brightness control example for ESP32 that uses LED Brightness Control Module in Dabble app.
+   This module allows you to control state of pin. You can make pin HIGH or LOW or can also assign any PWM
+   value to it.
+
+   NOTE: As in esp32 any channel can be configured as a PWM channel hence any first eight pins controlled by Module
+   will be treated as PWM and others will be treated as normal digital pins.
+    
+
+   You can reduce the size of library compiled by enabling only those modules that you want to
+   use.For this first define CUSTOM_SETTINGS followed by defining INCLUDE_modulename.
+
+   Explore more on: https://thestempedia.com/docs/dabble/getting-started-with-dabble/
+*/
+#define CUSTOM_SETTINGS
+#define INCLUDE_LEDCONTROL_MODULE
+#include <DabbleESP32.h>
+unsigned long lasttime=0;
+void setup() {
+  Serial.begin(115200);     // make sure your Serial Monitor is also set at this baud rate.
+  Dabble.begin("MyEsp32");     //set bluetooth name of your device
+}
+
+void loop() {
+  Dabble.processInput();    //this function is used to refresh data obtained from smartphone.Hence calling this function is mandatory in order to get data properly from your mobile.
+  //uncomment if you want to check if paramters read correctly
+  /*Serial.print("Led:");
+  Serial.print(LedControl.getpinNumber());
+  Serial.print('\t');
+  Serial.print("State:");          //0 if led is Off. 1 if led is On.
+  Serial.print(LedControl.getpinState());
+  Serial.print('\t');
+  Serial.print("Brightness:");
+  Serial.println(LedControl.readBrightness());*/
+}